Tag Archives: Humidity

The Perfect Climate for your Duty Free Goods

casestudy

Original Article from www.rotronic.com

Switzerland has around a dozen duty-free warehouses. These warehouses are transit zones for the storage of goods whose main advantages are the temporary suspension of customs law and taxes. They benefit not only from a location in the heart of Europe, but also from legal and political stability. The company Ports Francs et Entrepôts de Genève SA, is based in La Praille, where it manages a floor space of 150 000 m², half of which under the Swiss customs regime (duty-free).

To ensure it is able to meet high standards in quality and security, Ports Francs opened a new warehouse in 2014. It was specially designed to store valuable products in accordance with the requirements of insurers. To establish the necessary climatic conditions, Rotronic HF1 temperature and humidity transmitters were installed to enable control of the optimum storage climate.

hygroflex1_display_fornt_178
Hygroflex Transmitters HF1 Series 

 

1000 commercial premises in La Praille
There are currently 10 duty-free warehouses in Switzerland. Duty-free warehouses are usually located near national borders and airports. In contrast to most other countries, there is no time limit for storage in Swiss duty-free warehouses for goods not stemming from Switzerland. In 1888 the canton parliament approved the establishment of the operating company Ports Francs de Genève SA, which was later renamed to Ports Francs et Entrepôtsde Genève (PFEG).

site.png                                    Ports Francs et Entrepôtsde Genève

There are almost 1000 commercial premises of all sizes available in la Praille. The type of goods stored in duty-free warehouses has changed immensely over the years. The
strong development in the art and wine market has given rise to special security and quality requirements concerning,in the first instance, storage conditions (temperature, humidity and vibrations). The new warehouse building, designed in collaboration with specialised contractors, was inaugurated in 2014. The building, which serves mainly to store valuables such as antiques, works of art and wine, is the result of close co-operation between various specialists in security issues, insurance, energy and architecture as well as the end users. The numerous elements listed in the requirement specification included the critical details relating to climatic conditions (temperature and humidity) in the building’s storage rooms.

Like in our wine cellarsTransporting_the_Worlds_Finest_Wines_and_Spirits
To ensure a high standard of quality and security, Ports Francs et Entrepôts de Genève SA approached the Zurich-based company Rotronic AG in Bassersdorf. “We need precise and stable measuring instruments,” says technical director Marc Golay. The building concerned is equipped not only with a ventilation and air-conditioning system (humidity and temperature), but also with a central building management system utilising the concepts of  MSR (measuring, control and regulation). The building is divided into two large parts. The first is for storage of wine in accordance with applicable regulations (70% humidity, 13°C), as in the cellars of our forefathers. The second part is reserved for sensitive and valuable goods, primarily paintings (55% humidity, 21°C). “Since it was one of the main aspects of the building concept, we also wanted to have the possibility to trace the climatic conditions during storage.” This very functional location enables arrival of the goods by road with a loading platform and direct access to the premises. Equipment rooms, escape routes, freight elevators, elevators and sanitary facilities round off the building. “We wanted a system able to maintain a constant level of humidity and a constant temperature everywhere and at any time of the year. To ensure control and logging of these parameters, we opted for the measuring instruments from Rotronic”, adds Marc Golay.

Rotronic transmitters
Depending on the storage area of the goods, it is not always easy to check whether ventilation and air replacement are working effectively everywhere. The solution was to utilise 227 Rotronic HF1 transmitters within the complete premises. The instruments are monitored remotely by the MSR system from the Geneva manufacturers EnerBat – a specialist in the technical and energy monitoring in buildings – the system checks daily that the temperature and humidity requirements are being met. Since the building was designed to guarantee the best storage conditions, it does not have any windows so that the climatic conditions can be kept as stable as possible. To improve security for protection and prevention of fires, all stores are equipped with a common, dedicated gas extinguishing system.

The importance of using measuring equipment
Why was Rotronic preferred over other companies?

“It is a company with an excellent reputation that takes action immediately when necessary. It is extremely important that the probes work reliably and accurately as they deliver all the information on the climatic conditions in the building,” explains the technical director. Thus the importance of the measurements. The wall mount T/rh probes for the duty-free warehouse were fastened to the walls at a height of about 150 cm from the floor. They enable control of the temperature and humidity in the room air and emit a warning signal when limits are exceeded. The probes are also connected to the wider systems via analogue and digital outputs and finally integrated in a Scada monitoring system. “We decided to use the products from Rotronic because they were the best value for money,” says Fabien Caradot from Elitec. “There were of course other possibilities, but at the same price Rotronic scored higher with its HF1 product range in terms of quality, reliability of the material, technical support and calibration.” Elitec, which originally worked in the manufacture of electrical switchboards, today employs around 20 people and rounds off its portfolio of services with the fields of building automation, home automation and various inspection services such as technical and schematic analyses.

The Probes used the get the perfect temperature and Air humidity for Ports France et Entrepôts de Genève SA

  • 260 Main HF135-AB1X Probe (227 installed, the rest are reserved)
  • 22 Probes 9 Wall and duct mount probes) in the logistics hall of CICR
  • 2 Wall mount T/rF probes and 1 duct mount T/rF probe in the archives of CICR
  • 3 Duct mount probes in the red cross museum
  • 1 Ventilated outdoor probe for the Swissquote building in Gland
  • 35 Duct mount CO²  probes for the school Le Sapay

   Access to all our products or for more details please visit @www.rotronic.co.uk

Collages27-004

Emma Batchelor

Enjoy the Perfect Pasta

casestudy

JOWA AG Pasta has been the largest manufacturer of pasta products in Switzerland since it was founded in 1931. It is important for the company that its production operations run smoothly and meet strict quality standards.

Original Article from www.rotronic.com

Precision temperature and humidity probes from Rotronic are used to measure the climates in the factory’s six production lines, which predominantly manufacture dried pasta for the retailers such as Migros (Switzerland’s largest retailer). As a testament to the quality of Rotronic probes some units are over 15 years old and are still performing as required having only undergone routine calibration and adjustment to ensure that they provide consistently accurate accurate data.

JOWA AG manufactures 18,000 tonnes of pasta per year and is thus the largest pasta producer in Switzerland!

The pasta market is highly competitive and food legislation strict. It is therefore all the more important that the pasta is produced in the finest quality without production stoppages and rejects. The drying process plays a key role in the production of dried pasta and is therefore accorded top priority at JOWA. In order to control the climates optimally, temperature and humidity probes from Rotronic are used in the production lines. To preserve the food for a long shelf life and prevent mould and negative microbiological processes, the pasta is dried to a very specific level. Over drying wastes time, energy and produces a poorer quality product, under drying reduces shelf life and risks spoilage. Humidity and temperatures therefore need to be monitored closely during production. Legislation in Switzerland states that pasta products may not contain more than 13 percent water.

High Demands on Probe Accuracy

JOWA has been manufacturing pasta at its site in Buchs AG since 1963. The requirements of food standards, law and customers are rising continuously.

pasta
Spaghetti Production!

Oliver Höfler, head of the JOWA AG sites Pasta Buchs & Mühle Wildegg, comments:

Every single production step needs to be traceable in ever more detail, down to each single packet of spaghetti. The temperature and humidity of each production step must be recorded exactly.”

 

If unwanted temperature and humidity variations were to occur in the pasta, this could lead to quality defects such as crumbling. The pasta would then dry irregularly and break during cooking. For this reason a sample is taken of every product from the first three and last three pallets for quality assessment. The heads of the different departments evaluate the products daily according to various specified properties such as taste and appearance.

Oliver Höfler explains: “If we have to recall products from various stores, this means an enormous financial loss of several ten thousand francs and also a severe blow to the image of our products. A dissatisfied customer – that is something we cannot afford. For this reason it is essential that we are able to rely on the measuring accuracy of the Rotronic probes to 100 percent.”

In addition to this, samples need to be taken for analysis from ongoing production every four hours. “ We greatly appreciated the open and transparent collaboration with Rotronic.” Oliver Höfler, JOWA AG, Switzerland Migros dried pasta perfectly monitored. Rotronic I200 sensor, providing reliable service for more than 15 years.

Project Workflow: Good and Long-Term Planning

Planning calibration time is the key to success with humidity instruments. JOWA AG in Buchs stops production twice a year, two weeks in winter and two weeks in summer, in order to check all equipment and machinery and so maintain the high quality standards. Andreas Zülle, head of production, ensured that the 50 probes (both the I200 transmitters dating back to at least the year 2000 and the newer HygroFlex5 generation) were disconnected right at the start of the last inspection so that Marko Schulze, Rotronic’s qualification technician on site, could begin calibrating the measuring devices. All probes were also catalogued. Marko Schulze: “JOWA’s planning was ideal, I was able to check all probes and either get them back into shape or replace them, and then we still had enough time to test the newly adjusted probes.”

Product Focus – Rotronic HygroFlex5

hf_stahl_wand_front67_1

The HygroFlex5 series of transmitters connect to our entire range of HygroClip probes and offers analogue and digital outputs for any application.

HC2-S probe provides superb precision and state-of-the-art functionality, taking humidity and temperature measurement to a whole new level of accuracy < 0.8 %rh and < 0.1 K at 23 °C.

Also available with ATEX / Intrinsically safe certification.

 

Smooth implementation of the inspection and calibration procedure was important to Andreas Zülle: “After the calibration, our process specialists were able to start up the production lines again without problem.” Oliver Höfler adds: “We greatly appreciated the open and transparent collaboration with Rotronic, found Marko Schulze to be an extremely competent partner and are sure we will be able to carry out calibration of our instruments even more efficiently next time. They have now been catalogued in detail. On top of that, we can also check the probes during operation with the Hygropalm from Rotronic.” Both sides benefit from good planning and a good working relationship.

Some Interesting Facts about Jowa

  • JOWA Pasta has been producing dried pasta for more than 50 years
  • The durum wheat semolina needed for production comes from a mill in Wildegg that also belongs to JOWA.
  • A team of 46, working three shifts a day, ensure daily that high-quality raw materials are transformed into products at an optimum price-performance ratio .JOWA.jpg
  • JOWA employs a workforce of around 3,200 people and, with more than 140 apprentices and trainees, is the biggest training company in the Swiss bakery industry.
  • JOWA AG is the leading Swiss bakery and supplies its customers from the retail trade, convenience stores and food service sector daily with a wide range of products and individual service concepts.
  • Jowa produce buns, cream slices to pasta, ham croissants and braided bread, some even gluten-free – the bakery assortment goes far beyond the classical bakery range.
  • The service concepts are tailored specifically to the requirements of customers and extend from logistics and marketing to in-store production.
  • The tasty JOWA breads and pastries are very popular.
  • JOWA breads are served fresh on the table daily in every third Swiss household.

 

Measuring in clean rooms – Hands on with the Rotronic CRP5

For many years Rotronic products have been widely used in the monitoring and control of clean rooms, however more often than not our products are found out of sight quietly performing their measurement tasks away from areas with strict requirements for cleanliness demanded by modern clean rooms.

In the past few months Rotronic have launched two new clean room panels that are as the name suggests designed specifically for use within clean room environments.

Our flagship product in the field is the CRP5 which we will take a look at first.

crp-5_pfad
CRP5 – Clean room From Rotronic

The CRP5 is a comprehensive clean room panel designed specifically for the requirements of modern clean rooms. Once installed the unit provides virtually no areas for dust to collect and the industrial glass front is extremely resistant to chemicals. With a fully configurable colour screen it is a stylish looking device!

CRP1a
Unpacking the CRP5, the glass front, colour display and stainless steel fittings make the CRP5 elegant, easy to clean and functional

Internally the CRP5 delivers some serious capability, providing potentially a solution for all your clean room measurement and monitoring requirements. Including;

  • Differential Pressure via internal diaphragm sensor (measurement via rear ports and front ports for flexible instalation and calibration).
  • Interchangeable humidity and temperature sensor.
  • Two fully configurable analogue inputs (for particle counters, lux meters etc)
  • Two configurable switch inputs (for pressure or door switches etc)
  • 6 configurable relays (for alarm triggers)
  • Digital connectivity via RS485 and Ethernet (Modbus or direct connection to Rotronic HW4 software)

A unique feature of the CRP5 is the optional flush mount humidity probe. The probe is locked into place through the use of magnets and can easily be removed for cleaning or calibration. An optional rear mount connection is available for Rotronic HC2 humidity and temperature probes should you wish to monitor ducts or spaces remote to the CRP5 itself.

CRP2
The unique removable Humidity and Temperature probe for ease of cleaning and calibration

The configurable colour display shows alarm conditions which can be acknowledged via the front panel. Alarms can be used to trigger relays associated with audible and larger visitual alarms. Interaction with the CRP5 is via four optical buttons –  their use is completely unaffected if operators are wearing protective gloves or not (unlike capacitive interfaces).

CRP3
Optical buttons can be used easily even when wearing gloves!

As an FDA and Gamp5 compliant device the CRP5 is a safe choice for regulated industries. The instrument can be used with 3rd party systems via its analogue outputs or industry standard Modbus TCP / RTU communication. Alternatively the CRP5 can be connected to the Rotronic HW4 software package to provide a one stop solution for monitoring, control and alarming. Pharmaceutical validation services as well as ISO 17025 (UKAS) calibrations are available from Rotronic if required.

To get some more detailed information about our clean room solutions give us a call or visit our website… Rotronic Website and CRP5 Datasheet

Next time we will look at the Rotronic CRP1 a dedicated temperature and humidity clean room panel for  applications with slightly simpler requirements but still demanding a clean installation  and high accuracy measurements!

crp1_side
The CRP1 – Humidity and Temperature measurements in clean rooms.

Dr Jeremy Wingate
Rotronic UK

Why do we need Warehouse Mapping?

Rotronic is proud to be able to offer an increasing range of products and services to meet the demands of our customers. The requirements for mapping especially thermal mapping are increasing dramatically in food, pharma and cosmetics production and transport industries.

But what is Thermal Mapping?
Mapping is the process of determining the temperature and often humidity gradients within a defined space. It is a vital process when the product is regulated by government agencies such as the US Food & Drug Administration (FDA) or the European Medicines Agency (EMA). Regulated materials must not exceed strict storage conditions. Fixed limits will typically exist for humidity and temperature both in terms of the absolute value and also the allowable rates of change. Mapping serves as a baseline for proving compliance within the storage spaces.

The reason for increasing regulatory compliance is to ensure products do not spoil or otherwise degrade during production, storage and transport. Warehouses are notorious for having warm or cold spots that are outside of the regular control specification. A proper mapping study serves to locate these spots and either modify or avoid the problem area. Similar problems can occur during transportation so increasingly transport is at least monitored if not fully controlled and mapped.

At 4.3 million square feet, the largest warehouse in the world is the Boeing Everett factory in Everett, WA USA. It was originally designed to construct the Boeing 747.

An FDA Form 483 is issued to a company’s management at the conclusion of an inspection when an investigator(s) has observed any conditions that in their judgement may constitute violations of the Food Drug and Cosmetic (FD&C) Act and related Acts.

Mapping in General
A mapping strategy is needed for several reasons. It is important for regulators or quality managers to understand the philosophy employed for the mapping. A documented strategy will decrease questions from any regulators reviewing your mapping study. The strategy document also helps them understand the data that is produced by the mapping process. The document acts as a tool for collaboration as other people may suggest ideas that will make your study produce better data or make your effort more efficient.

As the mapping study progresses from start to finish, the strategy document acts as your reference guide, ensuring you remain true to the agreed upon process and do not make changes that will negatively affect the study. A typical strategy is usually comprised of a few written paragraphs that includes a description of the warehouse space, the type of equipment used, the number of sensors to be used, a general idea of the sensor placement, and the duration of the study. It is not unusual for the mapping strategy to change as it evolves. Writing a detailed document at the early stages of the project may cause re-writes that can increase the total length of the project. It is usually more efficient to fully document the warehouse mapping project after the strategy is agreed. Think of the strategy document as a proposal for your mapping team or the approval team so they can buy into and understand your mapping strategy. It may also facilitate the final approval stage, later in the project, because the auditor already understands the warehouse mapping project.

Continuous Monitoring After the Warehouse Mapping
Continuous monitoring is a best practice within controlled and regulated spaces. The mapping study will determine the hot and cold zones for “worst case” sensor placement. These worst case locations should be considered when installing a permanent, continuous monitoring system. The number of sensors used for a permanent system will be far fewer than what is required for the mapping study. In some cases, continuous monitoring may require only a few sensors once the problem areas have been determined through the mapping study. A continuous monitoring system offers peace of mind as product components, manufacturing space, or storage space are maintained and on record as meeting specified environmental conditions.

If you have any queries regarding warehouse mapping feel to get in touch and we will be happy to discuss!

Dr Jeremy Wingate
Rotronic UK

Rotronic training course schedule 2016

We are pleased to announce our latest training course schedule for 2016. Courses include in partnership with Dave Ayres from Benrhos Ltd our practical 3 day temperature, humidity and dew point calibration and measurement uncertainty courses. In addition, for those seeking greater depth we are running dedicated courses on measurement uncertainty and ISO 17025 run by Lawrie Cronin and Dave Ayres

Temperature Humidity and Dew Point – Measurement, Calibration and Uncertainty

8th – 10th March :: 12th – 14th July :: 15th – 17th November
– Three day course at Rotronic UK offices and UKAS laboratory
– Practical applied knowledge and best practice
– Max 8 attendees to ensuring tailored content

Measurement Uncertainty for Laboratories and Plant

6th – 7th September
– Two day course at Rotronic UK offices
– Detailed knowledge for laboratory owners or process managers

Setting up and working with ISO17025

8th September
– One day course at Rotronic UK offices
– Ideal for ISO17025 lab managers or those looking to apply

For further information please do not hesitate to contact us.

 

Energy Efficiency and Indoor Air Quality

Some of the key factors for improving energy efficiency in relation to indoor applications are the control of Relative Humidity (RH) and temperature. The question is, how to control RH to acceptable levels in an energy efficient manner. Energy efficient humidity control has a very strong bearing on thermal comfort, Indoor Air Quality (IAQ) and eventually on the health and performance of occupants in air-conditioned buildings.

slider-pane1-new

Passivhaus buildings are built to a voluntary standard to improve energy efficiency and reduce ecological footprint.

IAQ control seeks to reduce Volatile Organic Compounds (VOCs), and other air impurities such as microbial contaminants. As such it is important to control relative humidity which can be a key factor leading to mould growth and the presence of bacteria and viruses, dust mites and other such organisms.

Buildings rely on a properly designed ventilation system to provide an adequate supply of cleaner air from outdoors or filtered and recirculated air

TrueDry_DR120_HR

Buildings may rely on dehumidifiers like the one above to reduce RH levels to a comfortable range

Air-conditioning systems typically employ a high level of air recirculation to save energy during cooling and dehumidification. Typically recirculation rates are around 80-90%, but can sometimes be even higher. The challenge is not so much in dehumidification, but in doing so without having to overcool. As such, ventilation is integrated for general comfort and economical saving.

Rooms are often designed with specific conditions in mind including temperature, humidity, brightness, noise, and air flow. Careful engineering and implementation of building automation and control is the only way to ensure energy efficiency and building operation conditions are met during occupancy, at the lowest possible costs.

IAQ Facts:

Energy Efficiency (EE) refers to either the reduction of energy inputs for a given service or the enhancement of a service for a given amount of energy inputs.

Relative humidity is highly temperature dependent, so if the temperature is stable, it is much easier to achieve a stable RH.

Air in our atmosphere is a mixture of gases with very large distances between molecules. Therefore, air can accommodate a large quantity of water vapor. The warmer the air, the more water vapor can be accommodated.

Why the need to measure, temperature and relative humidity?

Precise temperature control of air which is supplied to a room results in maximum comfort for the occupants. The temperature should be held constantly at a particular set point to achieve this comfort.

Readings from temperature transmitters installed in the air supply duct are compared to readings inside a particular room. It is easiest to achieve a constant room temperature if there is little difference between the two values. Air temperature control in supply ducts can be employed in rooms in which the air handling unit is used mainly for the renewal of air.

hf3_2_o_display_1

Rotronic manufactures temperature and humidity transmitters such as the one above which are suitable for use in spaces where appearance is a factor.

It is with good RH control that we can process the air for air conditioned rooms independent of the state of outside air and the processes taking place in the room. This way the RH remains constant or within the preset limits and thus energy consumption for humidification and dehumidification is minimized.

Air conditioning is supposed to maintain room temperature and RH as precisely as possible through the use of systems which monitor and control temperature and humidity in the room (or in the air supply ducts to the room). Systems must be dynamic to manage the changing room air quality depending on the occupants and usage.

With precise measurement and control of temperature and humidity, energy consumption for humidification & dehumidification as well as heating and cooling can be reduced leading to energy efficient building operation with lower energy costs and healthier occupants.

Phil Robinson
Rotronic UK

Pharmacy Business Case – MEDICINES NEED WATCHING – CLOSELY!

Business Case BannerColleagues from our Swiss based HQ just outside Zurich have shared with us a great example of an increasingly important application based around the monitoring of medicines in typical high street pharmacies. Pharmacies may look like they simply store medicines on normal shelves but most drugs require strictly controlled and monitored conditions to ensure they reach us in perfect condition! Read on to discover more…

Medicines are sensitive products. Moisture or excessively high or low storage temperatures, can impair their quality. Incorrectly stored medicines lose their efficacy, leading to significant health risks. Correct storage is therefore vital, offering as it does the guarantee that medicines remain safe and efficacious and retain their high quality right up to their expiry date.

Meeting GDP/GMP requirements in pharmacies

The storage of medicines is legally regulated by GDP (Good Distribution Practice) Standard 9.2 and is inspected by the responsible authorities on site.

Insulins and other liquid antibiotics for instance must be stored in medicine refrigerators at a temperature between 2 °C and 8 °C. A temperature range of 15 °C to 25 °C applies to the vast majority of other medicines.It is compulsory to document the storage conditions of all medicines.

To help fulfil the legal requirements, Rotronic has launched the new HL-1D data logger – a convenient, precise, reliable logger that is virtually tailor-made for a medicinal environment.

Rosengarten Rotpunkt pharmacy

The HL-1D data logger has undergone exhaustive testing
under real-life conditions in the Rotpunkt Rosengarten
pharmacy. With its simple handling and remarkable price-performance ratio, the logger offers great potential for any pharmacy.

The Rosengarten Rotpunkt pharmacy is deeply rooted in the community of Bassersdorf, Switzerland and has been at its present location since 1985.

In 2011, Mr. Ivan Mihajlovic took over the directorship and today runs the pharmacy with a total of 10 employees.

Mr Ivan Mihajlovic
Mr Ivan Mihajlovic

“The quick evaluation of the data and the understandable visualization of the measurement values in a PDF report meet all QMS requirements and document the data long-term.”

HL-1D ideal for Pharmacies

Complete measurement chain

Rotronic offers complete solutions for the entire measurement chain. Even if you are already using other data loggers successfully, we have a range of innovative calibration solutions.

HL-1D for pharmacy

If you require more information or wish to discuss any monitoring, control or calibration applications you may have please do not hesitate to contact us.

Dr. Jeremy Wingate
Rotronic UK