BETTER AIR MEANS BETTER PERFORMANCE – Customer Application Case Study. Belimo

casestudy

We all know the situation; a meeting where your performance drops sharply. In most cases, this is a direct result of the poor quality of the air in the room.

Original Article from www.rotronic.com

Uncomfortable situations like this need not arise. CO2 displays by Rotronic make it easy to measure air quality, and the results can be used to initiate the appropriate measures. In an enclosed room, some 25 to 35 cubic metres of fresh air per person per hour are needed, given normal activities. This ensures that the carbon dioxide (CO2 ) content remains below 1,000ppm (ppm = parts per million [value of the proportion of carbon dioxide in the air]), and that the volatile substances exuded by humans are extracted to a sufficient degree. By comparison, the CO2 concentration in outdoor air is around 400ppm. The CO2 concentration is a good indication of the quality of the air in a room. The consumption of air rises particularly quickly in meetings, with many people in small rooms. By the time we notice this productivity has already declined. A CO2 sensor is the answer here. Alfred Freitag, Sales Manager for Switzerland at Belimo Automation AG, points out that a meeting should be interrupted when the CO2 concentration reaches 1,200 ppm and the room should be ventilated. The CO2 content in the air then drops rapidly, and productivity increases again.

The right to good air

Every person has a right to healthy indoor air (WHO). In the case of workplaces, the labour laws require that air quality and room climate must not represent a health hazard for employees. In the private sector, there are no regulations, and the owner is responsible. However, the Swiss Cantonal building regulations require energy-efficient buildings. This requirement can be met only when the buildings are airtight. Consequently, free exchange of air is no longer possible. Martin Bänninger, director of the SVLW (Swiss association for air and water hygiene), has this to say: “Most Cantonal building laws, or municipal building regulations, state the principle that a building must not endanger life or health of the building‘s users.” Furthermore, buildings must be erected according to the rules of the building trade, as laid down in the standards, directives and bulletins (SIA, SWKI).

Careful planning of ventilation systems

Today, however, an adequate supply of fresh air cannot be taken for granted. In densely built-up housing areas, normal ventilation through the windows is of limited value. A good room climate cannot be achieved by regular airing in all buildings – climate-regulating systems are a necessity. Building owners and ventilation planners should therefore conform to the specifications in the SWKI Directives – “Hygiene requirements for room air systems and devices” – starting with the positioning of the air intake, through the controls of the ventilation and heating systems to the instruction of the occupiers. In the case of more complex systems, the responsibilities for surveillance and maintenance must also be clearly defined. “The maintenance of the system should have high priority,” Alfred Freitag emphasises. To keep the ventilation systems functioning reliably, and to keep them hygienic, they must be carefully planned, constructed, regulated and maintained. Rotronic CO2 displays can then be used to monitor these ventilation systems, the data being read out via USB stick when necessary. Asked why Belimo decided in favour of the Rotronic CO2 displays, Alfred Freitag says, “We were very competently advised by Rotronic CEO Michael Taraba. He took care of our needs personally. In addition, the visualisation of the measured data was very important to us. They are simple and clear to read on the Rotronic display. Hitherto, Rotronic has proved a very reliable partner.” In addition, the Rotronic display permits global assessment of the air. It measures CO2 , humidity and temperature. This allows suitable countermeasures to be taken.

Product Snap Shot – CO2 Displayco2-panel_front133

The wall-mounted or bench-top CO2 display is
an inexpensive display unit that simultaneously measures and records CO2 , humidity and temperature. Equipped with the field-tested and proven ROTRONIC HYGROMER® IN-1 humidity sensor, this instrument offers unbeatable value for money. The instrument can be configured directly with buttons, and stored data can be exported to a USB stick for analysis with the free Rotronic software package SW21.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s